V60 Tetsu Kasuya 10-Pour
Tetsu grinds so coarse it looks like the beans were tapped with a mallet under a paper towel, then compensates with exactly ten precise pours — more pours usually add agitation and bitterness, but he decided this coarse bed needed ten to extract, and I find that arithmetic reassuring.
- Difficulty
- 3/5
- Grind
- very coarse (Comandante 40–45 clicks)
- Water Temp
- 203°F°F
- Brew Time
- 3m 30s
- Ratio
- 1:15
Equipment
- Hario V60 (Neo or standard)
- V60 paper filter
- Burr grinder capable of a very coarse setting
- Gooseneck kettle
- Digital scale with timer
- Bean tray for de-chaffing optional
Instructions
- Grind 20g of coffee extremely coarse — the grounds should look almost cracked rather than ground, roughly 40–45 clicks on a Comandante C40. Optionally shake out loose chaff before brewing for a cleaner cup.
- Rinse the paper filter, seat the dripper, add the grounds, and tare your scale to zero. Heat water to 95–96°C (203–205°F) — hotter than usual, since the coarse bed needs the heat to extract.
- Pour 30g of water for the bloom, saturating all the grounds. Let it rest for 30 seconds.
- Pour the second 30g (to 60g total) and wait 15 seconds.
- Pour the third 30g (to 90g) and wait 15 seconds. Continue this rhythm for every remaining pour.
- Add pours of 30g each every 15 seconds — to 120g, 150g, 180g, 210g, 240g, and 270g — keeping the water level steady and the pour gentle.
- Deliver the tenth and final pour to reach 300g total. Ten pours of 30g each land you exactly at a 1:15 ratio.
- Allow the bed to draw down fully. Target a total drawdown of 3 to 3.5 minutes and a final concentration near 1.3 TDS. Swirl or tap gently to settle the bed, then serve.
Video transcript sourced via VidProxy — watch on YouTube