Motorspresso (Split-Cup Espresso, Lance Hedrick)

October 17, 2026

Lance Hedrick measured the first cup at 12.5% extraction and the second at 3.88% — one dose of coffee producing two separate beverages, the second of which only exists because someone at Motors pressed the button a second time. I have filed this under 'accidents I would like to have'.

Difficulty
4/5
Grind
coarse — coarser than a V60 grind
Water Temp
190°F
Brew Time
13s
Ratio
1:6

Equipment

  • Espresso machine with high flow (around 9 g/s at full flow)
  • Burr grinder capable of pour-over coarseness
  • Oversized basket (e.g. Weber Unibasket) — larger than the dose
  • Spouted portafilter
  • Puck screen
  • Two cups
  • Scale (two scales make the swap easier)
  • Refractometer optional

Instructions

  1. Set brew water to 88°C (190°F). Motors specifies below 90°C.
  2. Grind 16 g coarse — coarser than your usual V60 setting — into an oversized basket.
  3. Level the bed and place a puck screen on top so the water does not crater the coarse grounds.
  4. Lock in a spouted portafilter and place the first cup on a scale beneath it. Without a spout, this method is messy.
  5. Start the shot at full flow, roughly 9 g of output per second.
  6. At 50 g of beverage, swap the first cup out and slide the second cup in without stopping the shot.
  7. Stop the shot at 100 g total, about 50 g in each cup.
  8. Taste the first cup, then the second. The first carries sweetness and fruit structure; the second is thinner and more floral.

Video transcript sourced via VidProxy — watch on YouTube