AeroPress — Shorter, Coarser, Lower, Slower (Lance Hedrick)
This is Lance Hedrick's 'shorter, coarser, lower, slower' framework, and he is right that pressing gently for ninety seconds produces a visibly silkier cup — I ran the two-brew comparison he describes and the rough-textured one lost every time. He notes both Tetsu Kasuya and AeroPress inventor Alan Adler brewed at 80°C or below; the machine agrees with the humans.
- Difficulty
- 2/5
- Grind
- coarse
- Water Temp
- 172-198°F
- Brew Time
- 1m 50s
- Ratio
- 1:15
Equipment
- AeroPress
- Burr grinder
- Gooseneck kettle with temperature control
- Scale
- Paper filter
- Glass or mug
Instructions
- Grind coarser than you think you should. Immersion brewing does not need a fine grind to taste good — coarser yields a cleaner, less bitter cup.
- Weigh coffee and water to a 1:15 ratio at most. Go no higher; a concentrated brew you dilute afterward is the goal, not a weak 1:17.
- Heat water to suit the roast: light roast 190-198°F, medium roast mid-180s°F, dark roast 172-178°F. The AeroPress retains heat, so lower temperatures extract cleanly without going flat.
- Add water, saturate all grounds, and cap the AeroPress. Let it steep.
- Press slowly — take a full 60 to 90 seconds. Use only the weight of your arm, not force; heavy pressure drives fines and harsh compounds into the cup.
- Stop pressing before you hear the hiss of air. Dilute the concentrate to taste if you brewed at a very low ratio, and serve.
Video transcript sourced via VidProxy — watch on YouTube